Machinery for process industries
Contact-us : +33 (0)4 78 55 52 65
 
Français English

Splicing solution

 

Hot and infrared splicing solution :

NorMec

 

Referred to "Normec method”, hot-splicing of extruded rubber products, extruded PVC and TPR products is offering superior quality and higher capacity than alternatives splicing techniques.

Having pioneered hot-splicing, Normec continues to be the global leader in providing our customers with reliable, flexible, and scalable hot-splicing solutions. We have provided solutions to splice EPDM, SBR, NBR, TPE and other materials. 

NorMec Standard press is delivered in accordance with the CE Directive.

We can help you throughout the process, from reception of profile's drawings until we have achieved the perfect splice.

 

 

Some presses types:

PE - TPE Semiautomatic joining press 601-04-200

presse soudure

 

PE - Semiautomatic joining press designed to increase joining capacity. Press is made for customer who choose whether to use PE-film with a width of 50, 60 or 70 mm film  It is very easy to change PE-film rolls and it is done under less than a minute.

PE-semiautomatic joining press is equipped with B&R control system and touch display. With touch display, all information is easily accessible and you can easily set times for heating and cooling the profile. 

Effect of infrared elements can also be controlled with touch display. It is possible to control the effect on profile and PE-film separately.

Press is designed to use a gap-program to insert profiles with safety and close molds after the profile is inserted. 

Typical cycle time for heating, insert film and cooling is 25 seconds.

PE-press is easy to operate and the operator loads the profiles into the machine and the splicing process is fully automated.

The machine is delivered complete as a single station with film dispenser.

 

 

 

 

Maxi film joining press 203-04-250 and 204-04-400

presse soudure film maxipresse soudure film

 

These presses are designed for profiles with a width of up to 250 mm and 400 mm. 

 

They are designed to endure high vertical and horizontal pressure and they have a very high heating capacity (6400 W.)

 

As all of NorMec’s splicing presses, this is also equipped with ”gap”-program. The ”gap”-program involves closing the tools in the machine with two- hands buttons; once released again tool opens approximately 2 mm and operator has both hands free to insert profiles into tool. After this, profiles will be locked in tool by pushing foot-pedal.

 

It is also possible to close the molds and lock profiles in tool in outer position, so it would be possible to cut profile directly in tool. So it's easy to achieve good angle splices when dealing with hard profiles.

 

 

 

  

 

Standard film joining press 101-00-150-D

 

presse soudure standard

 

 

Standard press 101-00-150-D is our newest and most advanced model. This press is a development of our reliable Standard Press 101-00-80, which we have produced for 20 years.

 

Press has the same outer measurements as all our machines in the 101-series, but with several new and smart solutions and improvements construction wise so that it can handle the 150 mm-long tools.

 

Press is prepared for/ to operate a semi-automatic film dispenser.

 

 

 

 

 

 

 

New optional solutions:

 

• R&B PLC with touch display (also available with instruments instead of touch display).

• Software delivered on CF memory cards makes it easy to change programs without technical personnel.

• Possible to do trouble shooting over the Internet or directly from the control panel. 

• Easy to change language at the control panel.

• This machine can be programmed to start and preheat in time before the operator gets to work. Operators will find the machine ready for production when arriving. 

• All adjustments can be secured by passwords.

• You will be able to transfer production data directly to the Ethernet.

 

 

All of NorMec’s splicing presses...

 

... are equipped with ”gap”-program. 

...  have functions that give the operator opportunities to close one by one side off the tools. This allows the operator to use both hands to hold multiple profiles when he wants to 

splice for instance 6 profiles in the same operation. It is also possible to close molds and lock the profiles in tool in the outer position, so it can cut profile directly in the tool. So it's easy to achieve good angle splices when dealing with hard profiles.

... are available with separate cabinets below the machine for storing all the electrical equipment.

 

 

Splicing mould for film vulcanizing presses

moules presse Normec

 

NorMec holds long experience in designing and producing moulds/tools for hot jointing.Our engineers have been designing and producing moulds since 15 years.This is a part of NorMecs core competence.

Each mould is designed from the customers profile configurations and gives a sturdy and perfect joint. No secondary treatment will be required; all moulds are delivered with trimming edge.

Our moulds can be produced for straight or angular splicing.You can have multiple cavities in your moulds for increasing your efficiency.

 

Moulds can be delivered for all NorMec splicing machine models.